Page 2 of 3 FirstFirst 1 2 3 LastLast
Results 11 to 20 of 21
  1. #11
    Player

    Join Date
    Aug 2013
    Posts
    1,176
    Quote Originally Posted by Defteros View Post
    1. no you wont.
    I always wait till fire lands on the target, so I can use the free fire3 proc when it activates. that means Thunder always end before I finish casting Blizzard 3.
    there's no dps loss.
    if you have to wait because thunder is still active , you can always throw in a scathe. more mp gain from UI, and no dps loss.

    2. you can call it dps loss ( on what, thunder 2 is faster than any other spell you cast, and grants you thunder 3 procs), I call it "more chance to get procs"==more dps. also, it lets the tank take aggro on everything, so less chance you lose aggro because you spam everything.
    1. Yes, you will, Bliz III does not give an instant mana tick.

    2. Your using Thunder II for an AoE rotation... it lowers your dps from wasting a GCD and also wastes mana that could have been used for Fire II.

    You talking about AoE agro is a total joke when your swiftcasting the first flare. SC should be used on the final flare of the rotation, so you also have that wrong. This is because SC flare creates a lot of agro and if you need to transpose after the final flare, some of the down waiting for MP ticks will be covered by the GCD still going after the SC-flare.




    Quote Originally Posted by Defteros View Post
    3. I don't actually remember the name of the ether xD if I remeber correctly, one gives you 270(280?) mp (that aren't enought for casting flare, and the other one gives you more MPs.. basically, if it regens more than 300 mp, that's the ether I was talking about >_<
    also, debating on CDs on an item you rarely use, it's kinda pointless.
    5 min cooldown with the NQ, 4.30 min with the HQ, you can do a masspull before the first boss, clear the second boss, do another masspull, cast your 2 flares and you are free to use it again.
    if it's still on CD, bummer. nobody will cry if you didn't chaincast 3 flares.
    Your using mp potions with a 5M CD, I'm using mp potions with a 3m36s CD, it's a pretty big difference.
    (0)
    Last edited by scarebearz; 07-23-2014 at 12:04 AM.

  2. #12
    Player
    Defteros's Avatar
    Join Date
    Jan 2014
    Location
    Italy
    Posts
    518
    Character
    Derek Hale
    World
    Ragnarok
    Main Class
    Thaumaturge Lv 80
    1. that's what Scathe is for.
    2. Fire2 does less damage then a thunder 3 proc. It's a single target action, compared to fire 2, but it's still more damage. it also lets the tank position every mob so you won't hit 1-2 mobs because you "start with aoes or you lose DPS"

    yes, I swiftcast the first one, because by the time I swifcast it, I still have quelling strikes active. and by the time I hardcast the second one, mobs most of the time are near death so it's pretty rare I'll have use the third one.
    the GCD of a swifcasted flare it's the same as an Hard Casted flare, I don't understand the problem. also, by the time you cast the third flare, the mobs are dead. you can use your time to move in range to hit the boss, or using E4E, Apocastasys, etcetera.
    Your using mp potions with a 5M CD, I'm using mp potions with a 3m36s CD, it's a pretty big difference.
    yah, my bad, I'll buy them tonight.

    p.s:
    Your
    ewwww. °w°
    (0)

  3. #13
    Player

    Join Date
    Aug 2013
    Posts
    1,176
    Quote Originally Posted by Defteros View Post
    1. that's what Scathe is for.
    2. Fire2 does less damage then a thunder 3 proc. It's a single target action, compared to fire 2, but it's still more damage. it also lets the tank position every mob so you won't hit 1-2 mobs because you "start with aoes or you lose DPS"
    1. Using scathe when it's not needed is a DPS loss... if you used your mana correctly you would be casting Bliz III - Thunder II after your AF3 phase. Scathe is always a last resort spell.

    2. Your talking about an AoE rotation... Fire II may do less damage than a Th III proc (that are not reliable to proc), but it hits multiple targets.... I never said to start with AoE on pull, you start with Fire III, this gives the tank plenty of time for positioning.

    Having Raging macro'd on Fire III is silly, having Quilling macro'd on Thunder II is also silly. They should be used exactly when you need them, ideally weaved into GCD's if possible. Having a macro like that... is a DPS loss lol.

    Quote Originally Posted by Defteros View Post
    the GCD of a swifcasted flare it's the same as an Hard Casted flare, I don't understand the problem.
    You should learn how GCD's work in this game, it would improve your DPS. Insta cast things like SC-Flare, scathe, procs all have their GCD duration *after* you've cast them.

    I.e. Hardcast Flare uses it's GCD during the cast, with SC Flare, the GDC is after the cast, giving you free time to Transpose and wait a bit for the tick without losing too much dps.
    (3)
    Last edited by scarebearz; 07-23-2014 at 12:53 AM.

  4. #14
    Player
    Defteros's Avatar
    Join Date
    Jan 2014
    Location
    Italy
    Posts
    518
    Character
    Derek Hale
    World
    Ragnarok
    Main Class
    Thaumaturge Lv 80
    Using scathe if you have too little mp while you wait for UI to regen your mp it's not useless. I deal more damage with a single scathe instead of waiting.
    You can cast blizzard 3 and thunder2 after AF phase if you have enough mp. So let's Just say my "till 100 mp" was wrong
    (0)

  5. #15
    Player
    Defteros's Avatar
    Join Date
    Jan 2014
    Location
    Italy
    Posts
    518
    Character
    Derek Hale
    World
    Ragnarok
    Main Class
    Thaumaturge Lv 80
    I never said I macroed raging strikes on fire 3, but still. Having it macroed does not prohibite you to use them whenever you need them. If I want to use quelling strikes during chainflare, I can use it. That's what manging cooldown means. I have These spells In a vertical hotbar, so I know when I can use them. And raging strikes is macroed to fire for comodity, and because fire takes the majority of a single target rotation.
    As for transpose after hard cast flare, if you say that the GCD is during the cast, I can safely teleport, or move and continue dpsing. I don't see. The problem
    (0)

  6. #16
    Player
    Jnty's Avatar
    Join Date
    Sep 2013
    Posts
    9
    Character
    Aislinn Abel
    World
    Shiva
    Main Class
    Thaumaturge Lv 50
    stop feeding the troll, scarebearz, its not worth it. really ;p
    (0)

  7. #17
    Player
    Defteros's Avatar
    Join Date
    Jan 2014
    Location
    Italy
    Posts
    518
    Character
    Derek Hale
    World
    Ragnarok
    Main Class
    Thaumaturge Lv 80
    Rude.
    And still, calling Someone troll because he doesn't share your point of view it's sad.
    Try to debate, instead.
    That's what forums are about.
    (0)

  8. #18
    Player
    Maero's Avatar
    Join Date
    Sep 2013
    Location
    Gridania
    Posts
    4,781
    Character
    I'shtola Maqa
    World
    Leviathan
    Main Class
    Dancer Lv 90
    Large pulls i much prefer to use Ice 3> Fire 3> F2>F2>F2> Flare>Convert>Flare> Mega Potion> flare, etc.
    Or if still enemies alive you can do instead Ice3> F3>F2>F2>F2>Flare>Transpose>Flare>convert>swiftcast flare>mega potion> flare
    As mentioned starting with Ice 3 speeds up fire 3 but my main purpose is to allow tanks a little bit extra time to build agro, because even with quelling strikes i can often tear agro from tanks.
    Also if say for instance thundercloud and Firestarter proc at the same time, thundercloud takes priority as there is a chance of it to proc again.
    And too many blm's i have seen seem to worry they will loose a firestarter and such, you do have time, do not stop a cast just to use it.
    (0)

  9. #19
    Player
    NyneAlexander's Avatar
    Join Date
    Jul 2013
    Location
    Bastok
    Posts
    1,121
    Character
    Nyne Helios
    World
    Excalibur
    Main Class
    Goldsmith Lv 80
    Quote Originally Posted by Defteros View Post
    Using scathe if you have too little mp while you wait for UI to regen your mp it's not useless. I deal more damage with a single scathe instead of waiting.
    You can cast blizzard 3 and thunder2 after AF phase if you have enough mp. So let's Just say my "till 100 mp" was wrong
    Unless you have to cast on the run, you're better off using blizard 1 while waiting for a UI mana-tick. Its got a higher potency and the casting time won't eat up an entire GCD rotation, so same time as casting scathe and waiting for GCD.
    (2)

  10. #20
    Player

    Join Date
    Aug 2013
    Posts
    1,176
    Quote Originally Posted by Defteros View Post
    I never said I macroed raging strikes on fire 3, but still. Having it macroed does not prohibite you to use them whenever you need them. If I want to use quelling strikes during chainflare, I can use it. That's what manging cooldown means. I have These spells In a vertical hotbar, so I know when I can use them. And raging strikes is macroed to fire for comodity, and because fire takes the majority of a single target rotation.
    As for transpose after hard cast flare, if you say that the GCD is during the cast, I can safely teleport, or move and continue dpsing. I don't see. The problem
    Sorry, but you don't see the problem, because you don't seem to understand it.

    Understanding GCD weaving / optimising is important if you want to do the most damage possible.
    (2)

Page 2 of 3 FirstFirst 1 2 3 LastLast