[Suggestion] Target switching while fighting a Group

[Renshi]

The left and right buttons (assuming you refer to the D-pad) during combat are reserved for navigating the combat UI. If you mean Rb and Lb or R1 and L1, then L1/Lb is the auto run button, and R1/Rb is the active/passive toggle buttons.

(this refers to a preset control scheme and not a custom setup)

The triggers/R2-L2 are the macro toggles, and therefore are already in use.

ugh... I failed to tell exactly what I meant. Sorry, but I was working and writing that post on my smartphone and I got completely forgotten about that piece of information.

I meant: Press the Left and Right button on your D-Pad while holding the Auto-run button. While holding that button, the skillbar will not receive commands from the D-Pad and you can cycle through targets.

I deeply apologize, I'll never ever build posts with my phone from now then since I can be lead to distractions while writing =D

In answer to Dreamer, in case of 3 monsters, the auto-targeting will take the closest one to your PC.

It is possible to have both the "Hold down Auto-run and press the arrows left to right to switch target" and "Target the closest near you after it gets KO'd". That could be another good idea.