[Suggestion] Target switching while fighting a Group

[TessaJalloh]

What about left and right buttons?

Anyway, the main issue here is that when you defeat a monster in a group, you most likely lose track of the next monster (nearer from you) of the group. This can be solved by triggering th event that changes the target when the monster is KO.

The left and right buttons (assuming you refer to the D-pad) during combat are reserved for navigating the combat UI. If you mean Rb and Lb or R1 and L1, then L1/Lb is the auto run button, and R1/Rb is the active/passive toggle buttons.

(this refers to a preset control scheme and not a custom setup)

The triggers/R2-L2 are the macro toggles, and therefore are already in use.

[Renshi]

The left and right buttons (assuming you refer to the D-pad) during combat are reserved for navigating the combat UI. If you mean Rb and Lb or R1 and L1, then L1/Lb is the auto run button, and R1/Rb is the active/passive toggle buttons.

(this refers to a preset control scheme and not a custom setup)

The triggers/R2-L2 are the macro toggles, and therefore are already in use.

ugh... I failed to tell exactly what I meant. Sorry, but I was working and writing that post on my smartphone and I got completely forgotten about that piece of information.

I meant: Press the Left and Right button on your D-Pad while holding the Auto-run button. While holding that button, the skillbar will not receive commands from the D-Pad and you can cycle through targets.

I deeply apologize, I'll never ever build posts with my phone from now then since I can be lead to distractions while writing =D

In answer to Dreamer, in case of 3 monsters, the auto-targeting will take the closest one to your PC.

It is possible to have both the "Hold down Auto-run and press the arrows left to right to switch target" and "Target the closest near you after it gets KO'd". That could be another good idea.