Several directx crashes

[Bibimaya]

Without oc gpu and log hardware

https://uploadnow.io/f/BLZYqSq

[Larirawiel]

OK, then try following:

1. download Hwinfo: https://www.hwinfo.com/download/
2. start it with "Sensors only"
3. Create a log. There are buttons in the bottom of the window.
4. play so for 20 minutes.
5. upload the log somewhere so i can look into it. You can also zip it if it gets too big.


Cheers

[Bibimaya]

OK, then try following:

1. download Hwinfo: https://www.hwinfo.com/download/
2. start it with "Sensors only"
3. Create a log. There are buttons in the bottom of the window.
4. play so for 20 minutes.
5. upload the log somewhere so i can look into it. You can also zip it if it gets too big.


Cheers

Hi,
I repost the log link, the crash occurs before the end of the log.

https://uploadnow.io/f/BLZYqSq

[Larirawiel]

The log looks good. No voltage issues and no temperature issues.

In the BIOS there should be a profile called "Intel Baseline Profile". If it is disabled then enable it. And disable XMP if it is enabled. Because XMP is memory controller overclocking.


Cheers

[Bibimaya]

good morning,
I've applied the parameters, I'll try them out today and get back to you.
thank you

[Bibimaya]

no crash so far, but I haven't played much yet

[Bibimaya]

Here's my assessment after a week's play,
I no longer crash when xmp is disabled
if I activate xmp and do a chase train, I crash (this is my benchmark)
my ram has a ddr5 profile of 7200 but is currently running at 4800.
Do you think there will be a fix to put the xmp back on?

[Larirawiel]

XMP is memory controller overclocking. It seems, your CPU cannot handle DDR5 7200. You could enable XMP and set it to DDR5 7100. If it does not work then set it to 7000 etc. You have to test it until you find a setting, which is stable.



Cheers