first custom build computer! need help...

[Nakira]

I just replaced my mobo and it didn't beep at post, so I thought the mobo was the problem. However, after trying everything, I got it to work by resetting the cmos/bios. I had to take the battery out, and move the jumper, for 30 seconds. Just moving the jumper did nothing. Try this and see if it helps. Does your motherboard have integrated graphics? If so, take the gpu out, plug your monitor directly into the board, and see if it boots. If it does, it's your GPU.

Also, I did not reformat my hdd or reinstall windows and my pc is running fine.

My mobo still doesn't beep, and never did, not sure why lol.

[Northman]

Use normal old dvi cable to display instead of hdmi if you didn't. You sd see at least smthng
there, otherwise check with old graphics card. Hdmi needs drivers and can be used after they are installed. Is there anything between processor and mobo, ie. thermal grease. Windows will need drivers for new hw, so sd be connected to net.

I had similar problem with new Ati system, after cable change I could see error message from mobo on screen: processor overheated. Standard Intel was not enough. More efficient propeller and game started.

[TypeZ]

Thank you everyone for the help and support. I've basically tried every method znd tips u guys gave me... Still this won't show me any pic. I also took it to repair shop today and the try his psu/ graphic card and still nothin. We even reset the bios... So the thing left to check is motherboard and processor? How does one check if motherboard or psu is goving trouble, because cpu fan spin and the mboard lights up.

[TypeZ]

Thank you everyone for the help and support. I've basically tried every method znd tips u guys gave me... Still this won't show me any pic. I also took it to repair shop today and the try his psu/ graphic card and still nothin. We even reset the bios... So the thing left to check is motherboard and processor? How does one check if motherboard or psu is giving trouble, because cpu fan spin and the mboard lights upp.

[Coldfire]

If the motherboard has no debug output there's no way to find out what's wrong with it. Might be RAM, CPU or the board itself

[Northman]

Funny if they cannot find the problem in repair shop. Same words than Coldfire said.
Good sign if there are lights anyway. Memories you can check also so that you put
only one stick in closest to processor and try. Or if you have other memory, try with them.
Google shows that this mobo has had memory problems. I still doubt
the processor goes cooking in 1 second and hangs but cannot be sure of course.
They don't easily break today though. One way to try is turn cpu fun round
blowing other direction. 500 W hmm maybe enough. I would doubt that also.
You have maybe old pwr supply left, I would use temporarily both of them
to check if 500W is enough. But if you are unsure how, forget my words.
Good repair shop finds the problem quickly. Good luck.

[Northman]

I didn't check your cpu, is this valid
http://www.overclockers.com/forums/s...d.php?t=691951

[TypeZ]

I didn't check your cpu, is this valid
http://www.overclockers.com/forums/s...d.php?t=691951

yeah i got a msi 970a-g45 motherboard and a evga gtx 550ti video card. I just called msi and they told me to try a stronger power supply?

[Coldfire]

MSI support is stupid. A PSU with 350W would probably be enough.

[TypeZ]

MSI support is stupid. A PSU with 350W would probably be enough.

Man... I tried everything in the book, freaking upset and dunno what else to do.....