Results -9 to 0 of 47

Threaded View

  1. 12-27-2011 02:07 AM #10
    TypeZ
    Player
    Join Date
    Jun 2011
    Location
    LL
    Posts
    109
    Quote Originally Posted by Coldfire View Post
    Search for "Clear CMOS Jumper" in the manual. It's a small jumper on 2 of 3 pins(the outer is marked with a 1) which has to be moved to connect the middle and the other outer pin(not the one marked with a 1) for a few seconds. Do not do this when the PC is running.



    It could be. At least it won't prevent you from seeing anything on your display. You will know if it works or not after it either started up properly and installs new drivers or shows you a BSOD on startup
    ok. I notice that when i power on the pc i dont hear any beep. The lights comes on the motherboard, cpu fan start spinning and the side fan.... But no light on the graphic card. So it think that the card is the problem here: what u guys think?
    (0)
    Last edited by TypeZ; 12-27-2011 at 02:59 AM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »