Guys, I had this issue over a year ago with a newly built computer. Please, let me summarize things of what to do. I want to let you know that if adjusting settings does not resolve stuff, then you have a defective part(s), which can also be hard to troubleshoot. The reason that the game tends to have the trouble is that most of the time you are not using most of the hardware power till you run games like this. So, here are the steps:
1. Check to make sure there are no hardware issues in the event view under windows.
2. Reinstall the graphic drivers with a CLEAN install. This will wipe any profile such as SLI settings.
3. Check to make sure that DirectX is updated. An earlier post of mine talked about this. (Windows 10 gets them through windows update, but may need to manually trigger for DX9 and DX11.)
4. If you are missing the .Net Framework 3.5 and the latest, install those. Again, an earlier post of mine explained how.
5. Make sure that all of the windows updates are installed. Some of them fix issues with the windows settings while others fix security vulnerabilities. Few actually add or change features.
6. For windows 10 users, try disabling the windows 10 gaming mode. (This will only be an option with windows 10 build 1703 or later, which currently is the creator update.) You can find more info at this link:
http://gadgets.ndtv.com/games/featur...ows-10-1680332
7. Reinstall the game if still issues.
Now, if after all steps above have been done and still crashing, then some more extreme tech settings will have to be done. Be very careful with what I am about to suggest as these steps are typically used by those who overclock their systems. You do not want to set things too high that will cause overheating and damaging hardware. If you are too scared to do this, ask someone who knows how to. That being said, adjust these settings: (Do these one at a time to see if any of these help. If not fix, set the settings back and try the next step.)
1. In the BIOS, adjust the voltage level to the PCI Express/Graphic card by a very small percentage such as 0.5 volts. Go a little higher or a little lower.
2. In the BIOS, adjust the voltage level of the RAM, again go only about 0.1 volts or even 0.2 volts.
3. In the BIOS, adjust the CPU Ratio to 1 setting difference.
4. In the BIOS, adjust the CPU Voltage by the lowest increment of only 1 step. (I am not sure what the change amount is here.)
If all of these steps still do not resolve the issue, then:
1. Do a reset of the BIOS settings.
2. Then make sure you have the latest BIOS firmware installed.
3. Then, go in each setting for the RAM and CPU and make sure that everything is set to the correct setting, such as the latency and DRAM Timing. Sometimes the BIOS fails to pick up the profile.
Now, if after all of these steps and still getting errors, I am sorry to say this, but this is confirmation that a hardware is failing. It will be either the PSU, Motherboard, CPU, or graphic card, or multiple at once. You will have to start troubleshooting which component is failing. To be honest, this is usually rare if the computer has been working for more than a year. So, I am hoping it is not this case.