1 Button macro for max-ethers?

[MariaNyan]

I'm suprised you guys have that high statrequirements for level 60 crafts, mine goes like this:



However it requires more steps so speedwise its slower, but the requirements are way lower.
Min according to simulator is 820 Craftmanship.

[StouterTaru]

I use this for my weekly red scrips, same level recipe. It takes 2 macros, requirements are around 770 craft, 820 control, 417 CP (could hit 413 with Manipulation instead of MMend):

/ac "Comfort Zone" <me> <wait.2>
/ac "Inner Quiet" <me> <wait.2>
/ac "Steady Hand II" <me> <wait.2>
/ac "Precise Touch" <me>
/ac "Basic Touch" <me> <wait.3>
/ac "Precise Touch" <me>
/ac "Basic Touch" <me> <wait.3>
/ac "Precise Touch" <me>
/ac "Basic Touch" <me> <wait.3>
/ac "Precise Touch" <me>
/ac "Basic Touch" <me> <wait.3>
/ac "Precise Touch" <me>
/ac "Basic Touch" <me> <wait.3>
/ac "Master's Mend" <me> <wait.3>

/ac "Steady Hand II" <me> <wait.2>
/ac "Precise Touch" <me>
/ac "Basic Touch" <me> <wait.3>
/ac "Precise Touch" <me>
/ac "Standard Touch" <me> <wait.3>
/ac "Great Strides" <me> <wait.2>
/ac "Byregot's Brow" <me>
/ac "Ingenuity II" <me> <wait.3>
/ac "Byregot's Blessing" <me>
/ac "Ingenuity II" <me> <wait.3>
/ac "Name of Water" <me> <wait.2>
/ac "Steady Hand" <me> <wait.2>
/ac "Brand of Water" <me> <wait.3>
/ac "Careful Synthesis II" <me> <wait.3>

[tayler1480]

I'm suprised you guys have that high statrequirements for level 60 crafts, mine goes like this:



However it requires more steps so speedwise its slower, but the requirements are way lower.
Min according to simulator is 820 Craftmanship.

The idea was to have no brands so you don't have to switch. For speed this may be the best(14 steps):



Since this is a 14 step macro & based on my lowest craft class stats:
- if you're low on control, you could put an "innovation" after the "brand of fire"(or other brand)
- if you're low on craftsmanship, you could put a "ingenuity" or "Ingenuity 2" before/after the "Name of fire"(or other brand)

An example below of both of the above things being added to the macro, just add the ones you need though adding both would make it a 2 button macro: