Results 1 to 10 of 1634

Hybrid View

  1. #1
    Player
    OneWingedSora's Avatar
    Join Date
    Apr 2014
    Posts
    507
    Character
    Mala Liath
    World
    Balmung
    Main Class
    Black Mage Lv 60
    Quote Originally Posted by T0rin View Post
    I think saving the CDs until after the add phase is good (including Aetherflow), but I usually don't wait until after Ferrofluid to start my opener.. the Ferrofluid generally goes off before you would get to DWT, so you mostly just have to delay the last bit of the opener before DWT, which includes RS, so it shouldn't make a substantial hit to your DPS. IMO this is better than waiting until after that to start using Aetherflow..
    Now, I haven't done this fight on Summoner yet but, on my Blackmage, I had our Bard play BV'd foes right after Sluice/Digi which ensured that I hit a fully buffed Flare w/ convert on the Limb + Living Liquid as well as having zero mechanics to interrupt you during that part. I imagine it would even MORE effective on Summoner because you would have fully buffed DoTs ( RS + Pot + DWT ) bane'd onto the limb as well as buffed Deathflare & Painflare hitting both as well. I would personally just use a regular triple fester rotation and hold off your buffs until Sluice/Digi.
    (0)

  2. #2
    Player
    Avia_Frost's Avatar
    Join Date
    Jun 2014
    Posts
    80
    Character
    Avia Frost
    World
    Gilgamesh
    Main Class
    Arcanist Lv 60
    Quote Originally Posted by OneWingedSora View Post
    Now, I haven't done this fight on Summoner yet but, on my Blackmage, I had our Bard play BV'd foes right after Sluice/Digi which ensured that I hit a fully buffed Flare w/ convert on the Limb + Living Liquid as well as having zero mechanics to interrupt you during that part. I imagine it would even MORE effective on Summoner because you would have fully buffed DoTs ( RS + Pot + DWT ) bane'd onto the limb as well as buffed Deathflare & Painflare hitting both as well. I would personally just use a regular triple fester rotation and hold off your buffs until Sluice/Digi.
    That's too long to hold. Also add doesn't last long especially the first one with LB. I usually get DWT right around the beginning of sluice protene, so I would wait for that then pop it. You get three stacks again just after you bane the dots on gaol, miasma, then lb. Add dies, then pop dwt and trisaster on boss like normal.
    (0)

  3. #3
    Player
    Sleigh's Avatar
    Join Date
    Sep 2013
    Posts
    1,563
    Character
    Philia Felice
    World
    Gilgamesh
    Main Class
    Thaumaturge Lv 70
    Quote Originally Posted by Avia_Frost View Post
    That's too long to hold. Also add doesn't last long especially the first one with LB. I usually get DWT right around the beginning of sluice protene, so I would wait for that then pop it. You get three stacks again just after you bane the dots on gaol, miasma, then lb. Add dies, then pop dwt and trisaster on boss like normal.
    It's only too long if you'd lose your 2nd or 3rd Raging by doing that, you'd lose 2nd if you clear decently fast (sub 10m, though you might be able to fit it in close to the end in a DWT, not sure) or 3rd if it's very slow (enrage-ish).

    I think it's pretty smart to save RS for the hand if you don't fall into either time limit, you can probably focus less DPS on the hand than ever with a RS Bane + Deathflare. Worst thing you can say about it is you'll miss Litany but lots of groups use Litany at a time when SMN doesn't exactly want to do DWT, which is the 20s before the Ferrofluid.
    (0)
    Last edited by Sleigh; 10-23-2015 at 02:26 PM.