Results -9 to 0 of 35

Thread: Race to 50

Threaded View

  1. #10
    Player
    Ksenia's Avatar
    Join Date
    Oct 2011
    Location
    Ul'dah
    Posts
    1,100
    Character
    Ksenia Solo
    World
    Sargatanas
    Main Class
    Weaver Lv 100
    Quote Originally Posted by kukurumei View Post
    pudding flesh is not hard once you know where to look.

    This is based on a rough cost of leveling/difficulty of process/ number of cross class mats that must be needed
    alchemy by far easy is even with pudding flesh class quest and usually show up on AH now.

    Armorer is not hard, but since it is a 3-step, it's up there with bsm, just because you need tons and tons of iron but iron and steel is npc achievable and very cheap, and completely within class.
    Pudding flesh is never available in the levels needed to do triple turn in leveling. It's used in the triple turn in for 45 though.

    Armorer is a round about better than others craft. I'm left with Armorer, Bsm and Carpenter to get to 50 and of those three, I will need less Armorer turn ins. Between those three I will need over 300 Mythril ingots just to get them to 45 and if I do 45 Armorer turn in that number will be up in the 500 range. That's 1500 Mythril Ore for the three of them. They are used in all three crafts.

    The thing is, with Bsm I use wood, leather and Ingots. With Crp I use Leather, Ingots and wood. In those cases I am not getting exper for the class in question on most of the parts. Armorer on the other hand I am making rivets and plates and the parts grind knocks 2 triple turn in or 18 items off my to do list to get out of the leve table.

    Having said all that I don't mind doing it. Shard grind, I do mind. I madfe most of my Mythril Ingots using the Gsm recipe and I've burned through around 2000 wind shard between that and wind shard, Lumber.
    (0)
    Last edited by Ksenia; 11-27-2013 at 04:14 AM.