Page 6 of 13 FirstFirst ... 4 5 6 7 8 ... LastLast
Results 51 to 60 of 125

Thread: BRD macro

  1. #51
    Player
    Bardo's Avatar
    Join Date
    Aug 2013
    Posts
    296
    Character
    Bardo Phor
    World
    Sargatanas
    Main Class
    Archer Lv 70
    Quote Originally Posted by Tua View Post
    /wait 2.5 rounds up to 3 seconds, so over time it'll waste enough half-seconds to be a dps loss.
    *edit - Nvm, additional testing, and you are right about this. Decimal points don't work, they just round up or down.

    Nonetheless:
    The ACTUAL problem with macros, as has been stated several times in this thread is that they disable the Command Queue for actions that are ON the global cooldown.
    Why is this a problem?
    Because without the server side command queue, you basically have to wait 2x your latency longer to execute an ON global action.

    Example of how you can test this:
    Write 4 macros identical to this for Straight Shot, Windbite, Venomous Bite, and Heavy Shot.
    /ac "Straight Shot" <t>
    /ac "Bloodletter" <t>

    Then go outside and shoot at something while trying to run through Straight Shot, Windbite, Venomous Bite, Heavy Shot. You will quickly notice that you have to wait until your client updates that the GCD is refreshed before it lets you use the next skill.
    Now replace those 4 macros with the skill buttons for Straight Shot, Windbite, Venomous Bite, and Heavy shot. Again, fire them in order and you will notice that you can actually press the button early and it will go off BEFORE the client shows your GCD is actually ready.
    This is because of the server side command queue.

    If you macro your main ON global cooldown abilities, then you potentially delay your Global Cooldown skills by 2x your latency every single global.
    In short fights this won't make much of a difference at all. In 5+ minute long fights, it could mean as much as 10% lower dps even with average latency.
    (3)
    Last edited by Bardo; 11-16-2013 at 01:19 PM.

  2. #52
    Player
    Thailer's Avatar
    Join Date
    Nov 2013
    Posts
    24
    Character
    Thailer Appleseed
    World
    Ultros
    Main Class
    Archer Lv 50
    Maybe I am slow or something but I have tried this for the last 15 mins and I notice no difference. My macro is in reverse order of yours though. I use the GCD skill last and ME, BL 1st and 2nd respectively. The skill latency is exactly the same. I just want to maximize every little bit of DPS I can so I would like to know how other people fair doing this.
    (0)

  3. #53
    Player
    Garnatian's Avatar
    Join Date
    Aug 2013
    Posts
    534
    Character
    Gaust Euler
    World
    Ragnarok
    Main Class
    Marauder Lv 50
    Quote Originally Posted by Bardo View Post
    Quick correction here, it most definitely does NOT round up.
    It's a know fact that it does round either up or down. It's easy to test, just create a macro like this:

    /wait 0.4
    /wait 0.4
    /wait 0.4
    /wait 0.4
    /wait 0.4
    /wait 0.4
    /wait 0.4
    /wait 0.4
    /wait 0.4
    /wait 0.4
    /s Finished


    and another like:

    /wait 0.5
    /wait 0.5
    /wait 0.5
    /wait 0.5
    /wait 0.5
    /wait 0.5
    /wait 0.5
    /wait 0.5
    /wait 0.5
    /wait 0.5
    /s Finished



    The 1st macro will end instantly (rounded to 0s) instead of in 4s while the 2nd will take 10s (rounded to 1s) instead of 5s.

    Not only does it round up, but macros also cannot be queued, meaning while a regular ability is queued up approx. 0.5s before the ability GCD concludes and activates as soon as it finishes, macros do not activate until the button press following the GCD finishing.

    DPS/Healing macros are generally a bad idea.
    (0)
    Last edited by Garnatian; 11-16-2013 at 03:50 AM.

  4. #54
    Player
    Thailer's Avatar
    Join Date
    Nov 2013
    Posts
    24
    Character
    Thailer Appleseed
    World
    Ultros
    Main Class
    Archer Lv 50
    I would agree for most classes. With Bard we want Misery's End and Bloodletter activated every time they are up. Using them in conjunction with 4 of our GCD skills (straight, venom, wind, and heavy) this gurantees they are activated when up and does not slow the GCD skill down when not. If we are talking about macroing all our skills together outside of ME and BL then yes I agree that is not the way to go.
    (0)

  5. #55
    Player
    Roy_M's Avatar
    Join Date
    Oct 2013
    Posts
    63
    Character
    Roy Masters
    World
    Hyperion
    Main Class
    Astrologian Lv 70
    Quote Originally Posted by TaneshimaPopura View Post
    Cause as others have stated, numerical for macro are rounded up. So you can either have sub 2.0 which pretty much is irrelevant and 3.0 which is a DPS loss. Secondly, in the event that something crops up like needing to do Silence while in the 2-3 second wait your macro will require to fire the first skill again and wait 2-3 seconds again for the subsequent one.
    That s quite odd if I place 2 secs the next command WONT GO, about silence yes you can use Blunt anytime since it ignores GCD, that s why you have to pay attention to the mobs movement, I think were aren t misunderstanding it s not like you press a macro and don t do anything else, Each time that 2.5 wait appears I m using a skill that ignores GCD like buffs as soon they are up or ME along with others. You can cancel a macro command with a normal hotkey command anytime as long it s after the animation and it happends the same if you don t use macros.
    (0)

  6. #56
    Player
    Danko's Avatar
    Join Date
    Sep 2013
    Location
    Gridania
    Posts
    42
    Character
    Nebo Jones
    World
    Gilgamesh
    Main Class
    Marauder Lv 70
    If you macro your main ON global cooldown abilities, then you potentially delay your Global Cooldown skills by 2x your latency every single global.
    In short fights this won't make much of a difference at all. In 5+ minute long fights, it could mean as much as 10% lower dps even with average latency.
    We have a winner!

    Macroing OFF Global Cooldown Abilities onto your Global Cooldown abilities is not a DPS gain because of the delay it causes to your Global Cooldown. Which in and of itself is a direct DPS loss but also cannibalizes straighter shot damage due to less heavy shot spam over time.

    If you absolutely insist on making a one button macro for your Off Cool Downs, make a separate one for them and weave them in between your GCD. But even then, you are sacrificing situational optimization to do that.

    The only real good reason to use these types of one button macros is if you do not care about optimal DPS and just want to spam one or two buttons for passable DPS without having to think too much about it. Depending on the player and the level of consistency with which you can keep up with your abilities, this could be a DPS increase for you. This is not optimal DPS for the job, however.
    (1)
    Last edited by Danko; 11-16-2013 at 05:18 AM.

  7. #57
    Player
    EasymodeX's Avatar
    Join Date
    Sep 2013
    Posts
    900
    Character
    Lunairetic Emx
    World
    Midgardsormr
    Main Class
    Lancer Lv 50
    Quote Originally Posted by Danko View Post
    If you absolutely insist on making a one button macro for your Off Cool Downs, make a separate one for them and weave them in between your GCD. But even then, you are sacrificing situational optimization to do that.
    The situational optimization you sacrifice is rather minimal if you have an effective approach:

    1 oGCD macro for ME/BL alone
    1 oGCD macro for ME/BL + all buffs except BFB
    1 oGCD macro for ME/BL + BFB

    Generally speaking, you can still control your cooldown usage by simply not pressing the second macro multiple times. If you have each cooldown elsewhere on your UI for tracking, you can even combine the BFB onto the second macro and simply take care when you press it. BFB is an infrequent danger though, so this situation is uncommon.
    (0)

  8. #58
    Player
    magicninja999's Avatar
    Join Date
    Aug 2013
    Posts
    45
    Character
    Rossco Jenkins
    World
    Balmung
    Main Class
    Conjurer Lv 50
    the 4 macros you need:

    1. /micon "Straight Shot"
    /ac "Misery's End" <t>
    /ac "Bloodletter" <t>
    /ac "Straight Shot" <t>

    2. /micon "Heavy Shot"
    /ac "Misery's End" <t>
    /ac "Bloodletter" <t>
    /ac "Heavy Shot" <t>

    3. /micon "Windbite"
    /ac "Misery's End" <t>
    /ac "Bloodletter" <t>
    /ac "Windbite" <t>

    4. /micon "Venomous Bite"
    /ac "Misery's End" <t>
    /ac "Bloodletter" <t>
    /ac "Venomous Bite" <t>

    Makes ME and BL 1st priority over the other skills, does not mess with the GCD and will make sure you use the skills EVERY time they are off CD.

    P.S. pop your own buffs....
    (0)
    Last edited by magicninja999; 11-16-2013 at 11:52 PM.

  9. #59
    Player
    pandabearcat's Avatar
    Join Date
    Sep 2013
    Posts
    1,517
    Character
    Alizebeth Bequin
    World
    Brynhildr
    Main Class
    Dancer Lv 90
    As I keep saying, you are breaking the golden rule with these macros, which is that no oGCD ability should ever be higher priority than a GCD one.
    (0)

  10. #60
    Player
    Thailer's Avatar
    Join Date
    Nov 2013
    Posts
    24
    Character
    Thailer Appleseed
    World
    Ultros
    Main Class
    Archer Lv 50
    We want ME and BL casted any time they are up.....
    (0)

Page 6 of 13 FirstFirst ... 4 5 6 7 8 ... LastLast