Gamepad Sensitivity (PC)

I'm using an Xbox 360 controller.
The right analog stick is too sensitive. The slightest touch will make the camera turn.
Also, after using it, the camera will still spin unless you try to center the analog stick precisely in the middle to make the camera stop turning.

In the System Configuration menu, there is an "Analog Stick Sensitivity" slider. The slider seems to only adjust for the Left Analog stick used for moving your character.
There needs to be one for the Right Analog stick (camera movement).

Would really appreciate a Dev response or acknowledgement.

I don't seem to have this problem, and I play with a wired 360 controller. Is your right analog stick broken/loose? I can jiggle mine around without it moving the camera at all. Though I didn't run the calibration tool (when it first popped up after install, somehow it was interrupted by a 1017 (lol), so I didn't bother trying again since it worked as is)

Quote:

---

Originally Posted by Zefie_M

I don't seem to have this problem, and I play with a wired 360 controller. Is your right analog stick broken/loose? I can jiggle mine around without it moving the camera at all. Though I didn't run the calibration tool (when it first popped up after install, somehow it was interrupted by a 1017 (lol), so I didn't bother trying again since it worked as is)

---

Sorry for late response.
Actually, the camera moves on its own. The most slightest touch on the right stick makes the camera move. It is not broken, it's brand new and it works well for other games.

The calibration tool doesn't seem to do anything other than making sure up is up and down is down, etc lol.

Does anyone else have this issue? This really sucks. I play both on PC and PS3. I'm playing PC for less latency/lag issues since my PS3 has a lot of it. But I hate playing PC version and the camera keeps moving when I don't want it to :-(

I am having the same issue have u found a solution?

Quote:

---

Originally Posted by DayumQuitPlayin

Sorry for late response.
Actually, the camera moves on its own. The most slightest touch on the right stick makes the camera move. It is not broken, it's brand new and it works well for other games.

The calibration tool doesn't seem to do anything other than making sure up is up and down is down, etc lol.

Does anyone else have this issue? This really sucks. I play both on PC and PS3. I'm playing PC for less latency/lag issues since my PS3 has a lot of it. But I hate playing PC version and the camera keeps moving when I don't want it to :-(

---

Are you using the wired or wireless version? The reason I ask is I used the PS3 controller on my PC using the MotionJoy software and I had a similar issue, the controller seemed to have a life of its own and even when I wasn't using the controller it looked like my character was taking a few steps forward or rotating on the spot. I thought it was because of it being the PS3 controller so I bought the wired xbox 360 controller for PC and I no longer have the issue. If you're using a wireless xbox controller, could it be that, that's causing it?

I have had problems with other games with the wireless pad so i have bought a wired 1 and will give u an update. I have done a bit of research on this problem and with the lack of information available i think it could b a driver issue not a game 1 but if any1 can solve this issue i will be very greatful. I have a genuine wireless xbox receiver and windows 8 alienware x51pc, i have uninstalled and let the computer install the drivers and calibrated the controller in game and thru windows 8 but still no luck.

Have you guys tried increasing the dead zone for the controller under Devices and Printers in Windows?

I have been in those settings and cant remember seeing anythin called dead zone but that sounds like the right phrase if i can stop it bein so sensitive

I have tried the wired xbox controller and still the same problem

Never mind my earlier suggestion. I was using custom drivers for my wired and wireless xbox controllers so I did have the deadzone options in configuration.
The standard PC drivers for the Xbox controller does not seem to have a deadzone option. =\

I'd suggest running the controller calibration in windows and see if that helps, if not you could always look for some custom Xbox drivers that would allow you to setup a deadzone.

what custom drivers work with RRB? i have tried x360ce but dont know if i have done it properly. How come no one else has this issue is it just me or all wired and wireless pads? i doubt it because there isnt any chatter about it. I have looked for days and the information is very scarce which says to me it could be my computer? i am going to try and uninstall every driver and do reg clean and plug it in and see if it works.

I'm using the drivers that came with the xbox controller... Driver version: 2.1.0.1349 and have had zero problems, my wireless PS3 using MotionJoy software had similar issues to what you're experiencing. I have no idea why though you're experiencing the issue with wired and wireless controllers, maybe it was just luck on my part that I've not had the issue with the wired controller, I dunno, sorry :(

Controller calibration doesnt help but what custom drivers work with the 360 pad? I have tried using x360ce but cant get it to work properly. With the lack of information is it my computer because every1 with the pc version using a pad cant have this issue can they?

Thanks for trying to help i might just send square an email. If i find a solution i will post it.

I'm sorry I couldn't be more helpful. I hope you do get it sorted and that SE help you find a resolution. I know this is a long shot, but you said the controller was new? Could there be a chance that it's a hardware issue? Have you tried taking it back to the company you bought it from to get a replacement to see if you have the same issue?

I also have 3 wireless controllers and its the same issue on them all, i definitely think its a driver issue with the pad because everyone else seems to be ok. Its just annoying more than anything the input is just too sensitive. If i done a clean install on windows can i keep my files like games movies etc...

I don't think you need to do a clean install of windows tbh, I'd personally wait to see if SE get back to you first before doing a fresh install. To keep your files, movies etc there's a couple of things you can try: you can try a repair of windows which should not delete any of your settings, files, movies etc. you can also try a system restore, which again will not affect your files, movies etc. Then there is the option of a clean install. Doing a clean install will remove all your files, settings, movies etc. you'll need to back up these files on an external hard drive if you have one. I'd recommend doing a back up anyway no matter what you decide to do, it's something I do regularly considering my past luck with computer components failing on me!