Several directx crashes

Without oc gpu and log hardware
https://image.noelshack.com/fichiers...-24-181253.jpg
https://uploadnow.io/f/BLZYqSq

OK, then try following:

1. download Hwinfo: https://www.hwinfo.com/download/
2. start it with "Sensors only"
3. Create a log. There are buttons in the bottom of the window.
4. play so for 20 minutes.
5. upload the log somewhere so i can look into it. You can also zip it if it gets too big.


Cheers

Quote:

---

Originally Posted by Larirawiel

OK, then try following:

1. download Hwinfo: https://www.hwinfo.com/download/
2. start it with "Sensors only"
3. Create a log. There are buttons in the bottom of the window.
4. play so for 20 minutes.
5. upload the log somewhere so i can look into it. You can also zip it if it gets too big.


Cheers

---

Hi,
I repost the log link, the crash occurs before the end of the log.

https://uploadnow.io/f/BLZYqSq

The log looks good. No voltage issues and no temperature issues.

In the BIOS there should be a profile called "Intel Baseline Profile". If it is disabled then enable it. And disable XMP if it is enabled. Because XMP is memory controller overclocking.


Cheers

good morning,
I've applied the parameters, I'll try them out today and get back to you.
thank you

https://image.noelshack.com/fichiers...174-mp-min.jpg

no crash so far, but I haven't played much yet

Here's my assessment after a week's play,
I no longer crash when xmp is disabled
if I activate xmp and do a chase train, I crash (this is my benchmark)
my ram has a ddr5 profile of 7200 but is currently running at 4800.
Do you think there will be a fix to put the xmp back on?

XMP is memory controller overclocking. It seems, your CPU cannot handle DDR5 7200. You could enable XMP and set it to DDR5 7100. If it does not work then set it to 7000 etc. You have to test it until you find a setting, which is stable.



Cheers