Results -9 to 0 of 25

Threaded View

  1. #14
    Player Rambus's Avatar
    Join Date
    Mar 2011
    Location
    Windurst
    Posts
    1,561
    Character
    Rambus
    World
    Bismarck
    Main Class
    BRD Lv 99
    Quote Originally Posted by Cream_Soda View Post
    Well, jin is 4 hits when you include the offhand hit.

    Jin is 1.0 ftp per hit, making it 4.0 ftp, if you use gorget, the first hit is 1.1 ftp, shadow belt, 1.2 ftp.

    So you're looking at a max of 4.2 ftp before looking at DA/TA procs (I'm not going that far into it).

    1.2, 1.0, 1.0, 1.0 ftp respectively on the four hits.

    First hit: 1.2/4.2 = 28.57%
    Second hit: 1/4.2 = 23.81%
    Third hit: 1/4.2 = 23.81%
    Fourth hit: 1/4.2 = 23.81%

    As far as blade jin goes, comparing crit vs crit and non crit vs non crit, The first hit is only worth 28.57% of your total damage, where as the second, third and fourth are worth 23.81% of your damage each.

    Even missing the main hit, you're still have the potential to reach 71.43% of your maximum damage.


    Let's look at Metsu
    3.0 ftp, plus one offhand hit for 4.0 total. Add gorget + belt, 4.2 ftp (and w/ better mods imo than Jin, if this ws could crit, you'd have a better ws)

    First hit is 3.2 ftp, second hit is 1.0 ftp.

    First hit: 3.2/4.2 = 76.19%
    Second hit: 1/4.2 = 23.8%

    See how much more important the first hit is here than in Jin? If you miss that first hit, 76% of your damage is trashed and you're left w/ the pathetic 23.8% remainder.

    This is why your damage was so low.
    wind/ thunder
    and you didn't math the chance of missing 3 hits out of 4.
    thats .011875%
    not counting DA/TA, its even lower with that
    (0)
    Last edited by Rambus; 03-18-2011 at 05:43 AM.
    Quote Originally Posted by Camate View Post
    Spending Gil = Game balance, next question please tia
    Quote Originally Posted by Babekeke View Post
    They're reading and agreeing that these are very good ideas.... to be implemented to rune fencer.

    Just like any good suggestions in the RDM thread get applied to SCH.