I dont think its just me seems it happens to a few ppl but realy sucks with the time limit issue in aby area's when you walk up to a maw or conflux and it doesnt load. I dont know if this is a render issue or what but gets anoying when it happens.
Maw's and Conflux's in Aby areas
Printable View
-
03-14-2011, 05:05 PMRitsukaMaw's and Conflux's in Aby areas
-
03-14-2011, 05:33 PMFlunklesnarkin
It happens to me and others i know sometimes.. only when its really crowded tho.. or there are lots of mobs about.
I think it has something to do with how many models your computer can render or your settings.. im not too computer savvy tho heh..
Easy way to fix it is run a ways out 50 yalms or sight distance.. a grid square works fine also if you aren't sure on distances.. then back again and it should load. -
03-15-2011, 05:23 PMRahlk
Flunklesnarkin offered some very valid suggestions as to why this may be happening. This is attributed to hardware/latency. If you'd like assistance with information or optimization the issue please contact the support center at FINAL FANTASY XI Support Site (hyperlink) > Final Fantasy XI. Thank you for bringing this concern to our attention and I hope it hasn't caused too much of an inconvenience for you!
-
03-16-2011, 07:13 PMKaych
Well, thats not always the case. When I teleport from Jeuno to a Maw, then sometimes there are nobody standing outside of the maw. So its definetly not too many people on the screen :/
Quote:
Originally Posted by Flunklesnarkin
-
03-21-2011, 11:22 AMKhajit
It's happened to me when trying to zone into abyssea empy paradox before with only one person nearby. I lost a bunch of twilight gear that would have free fell to me that way.
-
03-21-2011, 11:37 AMSNK
It's generally a latentcy issue. I've had it happen a couple of times. Easy fix for me was just walk far enough away from where it's suppose to be, walk back and it's rendered back where it was supposed to be the 1st time.
-
03-22-2011, 12:49 AMTamoaThat's what I have always done - until that one time I zoned out of the Shinryu battlefield, the maw in the Empyreal Paradox did not load. I had to log out and back on. -.-Quote:
Originally Posted by SNK
-
03-24-2011, 10:25 AMBaccanale
Greetings, Ritsuka!
Thank you for taking the time to post your concerns about Abyssea. While your fellow players have offered some very helpful advice regarding the situation, we can still submit a report for the matter for you if you continue to experience trouble. In order to make sure that a thorough investigation is conducted, it would be most helpful if you provided as much information as possible in the following form:
Thread Title:
Short outline explaining what sort of issue you are experiencing.
Platform:
Specify which platform was in use to play the game.(“PlayStation2”, Windows, and/or Xbox 360)
ISP:
Name of ISP you use to connect to the Internet.
Type of Internet Connection:
Specify the type of connection. (dial-up, DSL, CATV, Optic Fiber, Other)
Internet Connection Speed:
Specify the speed of internet connection. (Example: 768Kbit/s, 5Mbit/s)
Date & Time:
Date and time of when the issue occurred. Please be sure to state the time zone of your region. (Example: Pacific Time = PST/PDT)
Frequency:
State how frequently the issue occurs. Please select from the following.
1. Always
2. Sometimes
3. Once (did not reproduce)
4. Unknown
Character Name:
Which character did the issue occur with?
Race:
Race of your character when the issue occurred.
(Hume M, Hume F, ElvaanM, ElvaanF, TarutaruM, TarutaruF, Galka, Mithra)
World:
World where the issue occurred.
Main Job:
Main job and level of your character when the issue occurred.
Support Job:
Support job of your character when the issue occurred.
Area and Coordinates:
Area and map coordinates where the issue occurred.
Party or Solo:
If you were solo when the issue occurred, please write “Solo”. If you were in a party, please write “Party”. With alliance, please write “Alliance.”
*If you wrote “Party” or “Alliance”, please also include the number of members.
NPC Name:
Name of NPC that your character was interacting with when the issue occurred.
*If you were not interacting with any NPC, then please write “None”.
Monster Name:
Name of monster that your character was battling against when the issue occurred.
*If you were not battling against any monster, then please write “None”.
Steps:
Detailed steps on how the issue occurred.
*Please try to include the following details.
•What you were doing when the issue occurred. (Example: Battle, mission, quest, crafting, synthesis, etc.)
•Please do your best to write using official terms for item names and skill/ability names. Please avoid any abbreviations or improper terms.
•If you were using macro commands when the issue occurred, please include the details of the command.
•In case the error message appeared when the issue occurred, please include what the message said.
*In case you cannot post all of the information in a single post due to character limitations, please make multiple posts.
Thank you all for your participation! -
03-30-2011, 03:02 AMKaych
19:56 GMT+1, tuesday 29th March
Asura
Maw at North Gustaberg wich leads to Abyssea Grauberg
I play on PC
DSL internet I think
It happends sometimes
The Maw reappeard when I run away very far away from it
I was playing as 90BLM/45RDM
I am a taru male
Dunno the ISP
The problem happends very often
Hope thats enough ^^ -
03-30-2011, 12:58 PMBaccanale
Greetings, Kaych!
I appreciate you taking the time to contribute to the thread. Unfortunately, we are required to obtain information from player that originally started the thread, so in this case, we would need Ritsuka to fill out the previously provided form. However, if you would like to have a report submitted for you, I recommend starting a thread with the form filled out, and we will be more than happy to pass along your information for you. Thanks again for your participation! -
04-20-2011, 12:47 AMdarkvisionthis is not entirely true to be honest with you in reguards to hardware. this happens to me ALOT and if your curious i will give you detailed specs for my PCQuote:
Originally Posted by Rahlk
Motherboard - Unreleased Motherboard from MSI
Processors - 2xAMD PHENOM II X6 1090T AM3 BLACK RETAIL
Graphics - 4x ATI 2GB RADEON HD 5870
Memory - 4x GEIL 4GB DDR3 1333 CL9
Power Supply - THERMAL TAKE W0171 1500W TOUGHPOWER CABLE MAN
Rom Drive - LG 10x Internal Blu-Ray Writer BDRW
Boot HDD - 2x OCZ Colossus Series 500 GB SSD drives(runing as Raid0)
Storage HDD - Samsung 3.5" 2TB 32MB SATA (F3EG) HDD x4 (running as ATA)
Sound Card - M-Audio Delta 1010 set to 128 bit 320 Kb/s Audio (customised software to control 7.3 sorround sound)
Keyboard - Logitech G19 & Razer Lycosa(Mainly for its software macroing for AutoCAD & Mocrostation stuff and both conneted at ame time)
Mouse - Logitech Gaming Mouse G500 & 3Dconnexion SpacePilot PRO 3D mouse
Controller - lol Xbox 360 USB
Cooling - Customized Dual water cooling system
Network - TP-Link TL-WN851N 300Mbps 802.11n PCI Adapter.
Internet Connection 100mb connection
the maw or some NPC's just dont show up even after runing 200 yalms away and back again. would love to hear you say its a hardware issue. all setting i have are at max. most time is when i am only person at the conflux and maw inside abyssea. sometimes it will not come back without rezoning even if i run to another flux and use it.
all drivers are up to date (although reluctand due to some minor flaws with the drivers which only effects AutoCAD and Microstation) as well for directX, i just cannot think as to what is the cause since, hardware wise.
my PC is a purpose built ultimate gaming PC as well as 3D rendering and is capable of displaying over 1000 character models on the screen with no lag with a resolution of 1920x1080 with tweeked 4xScaling on other games.
i have no problems with mobs/other players only problems with conflux's maws and avatars.
any thoughts to what the problem may be? my personal opinion is due to the limitations of the FFXI client.