Printable View
I've had to force power down my Laptop 7 times just to get FFXI to work long enough to use warp to get out of the zone. It doesn't happen anywhere else but Caedarva Mire causes my entire laptop to seize up until it gives the the blue screen of death.
Hello Khie!
I am sorry that you are having issues with this area, I can only imagine the frustration it was causing. As this seems more like a technical matter, than an in game bug, I will be moving this concern to the Tech Forums.
Thank you!
-SGM Jhanaka
I having the same problem and im now stuck on a CS and cant leave the area or do anything keeps crashing over and over Help!
We would like to apologize for the problems you are experiencing, and we can offer a few suggestions to try to assist you in resolving this problem.
Suggestions:
1. Check to make sure you have properly configured or turned off any of the following: Routers, Proxy Servers, NAT Servers, Internet Connection Sharing services.
2. If you are using any kind of software/hardware Internet Sharing service/device the following ports need INCOMING access to your PC: TCP 1024 - 65535, UDP 53, and 50000 - 65535. Also, check to make sure that the ports mentioned are not blocked by your ISP for INCOMING access. Proper configuration of any of the above items mentioned should be done by following the instructions in the software/hardware manual or calling the manufacturer's technical support.
3. If you are using a router, and have configured that router for port forwarding, temporarily bypass that router and connect directly to the modem.
Please take note of the following:
• Proxy servers, and satellite connections are not supported and do not work correctly with FINAL FANTASY XI.
• Your router may require that you use a PC to configure your network settings. For more information about how to configure your network settings, please refer to the instruction manual that came with your router or contact the manufacturer directly.
• If your Internet Service Provider (ISP) specifies a DNS server, you need to make sure to configure your settings to allow packets to pass through UDP Port 53 as well. For more information, please refer to the instruction manual for your router or the information provided by your ISP.