Results 1 to 2 of 2
  1. #1
    Player Khaulde's Avatar
    Join Date
    May 2013
    Posts
    1
    Character
    Khaulde
    World
    Asura
    Main Class
    THF Lv 35

    Mog House Loading

    Past couple of days every time I enter/exit my Mog House in Bastok, the loading time seems to be double what it usually is. Not sure if its anywhere else, but i figured it might be worth reporting.

    Edit: Just zoned into Mog House from Jeuno, and it took ages to zone in.
    (0)
    Last edited by Khaulde; 05-16-2013 at 08:56 PM.

  2. #2
    Support Rep SE_Chris's Avatar
    Join Date
    Nov 2011
    Posts
    153
    We would like to apologize for the problems you are experiencing, and we can offer a few suggestions to try to assist you in resolving this problem.

    Suggestions:
    1. Check to make sure you have properly configured or turned off any of the following: Routers, Proxy Servers, NAT Servers, Internet Connection Sharing services.
    2. If you are using any kind of software/hardware Internet Sharing service/device the following ports need INCOMING access to your PC: TCP 1024 - 65535, UDP 53, and 50000 - 65535. Also, check to make sure that the ports mentioned are not blocked by your ISP for INCOMING access. Proper configuration of any of the above items mentioned should be done by following the instructions in the software/hardware manual or calling the manufacturer's technical support.
    3. If you are using a router, and have configured that router for port forwarding, temporarily bypass that router and connect directly to the modem.

    Please take note of the following:
    • Proxy servers, and satellite connections are not supported and do not work correctly with FINAL FANTASY XI.
    • Your router may require that you use a PC to configure your network settings. For more information about how to configure your network settings, please refer to the instruction manual that came with your router or contact the manufacturer directly.
    • If your Internet Service Provider (ISP) specifies a DNS server, you need to make sure to configure your settings to allow packets to pass through UDP Port 53 as well. For more information, please refer to the instruction manual for your router or the information provided by your ISP.
    (0)